Steel Grid™ is typically used for beach front vehicular deployment, emergency roadways, for access across poor areas of sub-grade support and for temporary or permanent roadway stabilisation. SteelGrid is manufactured from hexagonal woven wire Mesh Type 80 commonly referred to as double twist wire mesh and lined with a pre-attached geotextile on one side of the mesh. The geotextile which is used mainly for separation, is manufactured from continuous polyester filaments, that have been double needle-punched and glazed on the one side. The steel wire used in the manufacture of Steel Grid is heavily zinc coated. FSteel Grid is reinforced with a transverse rod, woven into the mesh at 160 mm intervals. FlexMesh™ is manufactured and supplied in standard lengths and widths.

Documents
Steel Grid