|
MULTILIFT MP 50
|
Material hoist with passenger transport (possibility) |
Available
accessories |
| Hoist control from cage or base station |
Erecting platform |
| Material transport at 23m/min |
Electric erecting crane |
| Fast erection |
Landing bar |
| Safety device |
Base frame stabilizers |
| Concrete foundation slab not necessary |
|
| |
| Load capacity: |
500 kg ( including max. 3 passengers ) |
| Rated speed : |
23/12 m/min. |
| Cage dimensions : |
1500 x 1500 mm |
| Max. height of tied mast |
75 m |
| Wall tie spacing |
6 m |
| Mast section weight |
60 kg |
| Hoist unit weight |
900 kg |
| Power supply system |
3NPE 50 Hz 400 V/TN-S |
| Main fuse |
25 A veya 16 A (C, D characteristics) |
| Drive motor power |
4 kW |
NV 1500 - NV 2000
| Model |
NV 1500 |
NV 2000 |
| Load capacity |
1 500 kg |
2 000 kg |
| Rated speed |
30 m/min. |
35 m/min. |
| Cage dimensions |
3000 x 1355 mm |
3000 x 1355 mm |
| Lifting height |
70 m (Increased lifting height on request) |
70 m (Increased lifting height on request) |
| Drive motor power |
2 x 8,3 kW |
2 x 11 kW |
| Main fuse |
50 A/D |
63 A |
| Power supply system |
3 PEN ~ 50 Hz 400 V/TN-C-S |
3 PEN ~ 50 Hz 400 V/TN-C-S |
NV 2040
| Model |
NV 2040 |
| Load capacity |
2 000 kg |
| Rated speed |
30 m/min. |
| Modular cage dimensions |
2 400 x 1490 mm |
| 2 800 x 1490 mm |
| 3 200 x 1490 mm |
| 3 600 x 1490 mm |
| 4 000 x 1490 mm |
| Lifting height |
70 m (Increased lifting height on request) |
| Drive motor power |
2 x 11 kW |
| Main fuse |
63 A |
| Power supply system |
3 PEN ~ 50 Hz 400 V/TN-C-S |
Aluminous building hoist ALULIFT 200 Alulift
200 is designed for small and medium building companies. It is
based on a ladder mast made of aluminium alloy (2m mast section
weighs less than 12 kg) with drive unit mounted in its bottom
part. Cage of this hoist is lifted or lowered by winding main
rope guided over the pulley block in the upper part of the mast.
There are different models of the cage depending on transported
materials. The cage is equipped with safety device which
prevents the cage from falling down in case the rope breaks. It
is possible to operate the hoist in vertical (Alulift 200 V) or
inclined (Alulift 200 S) direction. The hoist is designed for
220V power supply system and can be connected to common
electrical network.
| Model |
ALULIFT 200 S |
ALULIFT 200 V |
| Pay load capacity |
200 kg |
200 kg |
| Speed |
25 m/min |
25 m/min |
| Lifting height |
standart 13, max.19 m |
standart 13, max.60 m |
| Wire rope |
6,3 mm |
6,3 mm |
| Control voltage |
24 V |
|
| Prospectus |
1 PEN 50 Hz 220 V - 1,5 kW |
1 PEN 50 Hz 220 V - 1,5 kW |
|
